SubZero Refrigerator Freezer Error Code 15 – How to fix? by SubZeroRepairService.us
Sub-Zero is the embodiment of style and performance refrigeration. It isn’t simply a device, your Sub-Zero is an essential element of your exceptional kitchen area. It makes good feeling that you wouldn’t mean to trust your fridge to merely any kind of residence device fixing company. You desire a group of Sub-Zero refrigerator fixing experts that can protect your financial investment while supplying the costs service you deserve.
It Is Fixed Home Appliance Correcting is business you should rely on with every one of your Sub-Zero repair needs. Our specialists specialize in Sub-Zero remedy so you can count on that we have the capacities to finish the task right.
HOW TO USAGE THE MISTAKE CODE TROUBLESHOOTING GUIDE
Mistake Codes recommend problems registered by specific components. If error codes are registered, they will absolutely appear prior to temperature level analyses while in Diagnostic Setup.
BEAR IN MIND: If Mistake Codes appear with a blinking “REMEDY” annunciator prior to initiating Diagnostic Mode, the system experienced excessive compressor run problem that could or may not be connected to the Blunder Codes displayed
To initiate Diagnostic Setting, press and additionally hold either CHILLIER trick, after that press the POWER secret, then launch both tricks. Currently, evaluate to see if Mistake Codes exist, making sure to toggle with all blunder and also temperature level analyses by pressing either COLDER important or either WARMER key. (See Mistake Code Table Below).
If Mistake Codes show up during Diagnostic Mode, adhere to the Error Code Troubleshooting Overview on the sticking to websites. The left column of the troubleshooting guide information the error codes. The information in the appropriate column clarifies what tests to execute and/or what activity to require to deal with the blunder.
KEEP IN MIND: If error codes are observed in diagnostic mode, a non-flashing OPTION annunciator will definitely show up on the LCD when Diagnostic Setting finishes, recommending mistake codes are still conserved. Error Codes should be gotten rid of from the digital control memory by hand. To eliminate the non-flashing SERVICE annunciator and also the error codes, the problem has to be remedied in addition to the unit has to be ON, after that:.
On a variation UC-24C: Press the Fridge Freezer WARMER as well as COLDER tricks for fifteen (15) seconds.
On a layout UC-24B, UC-24R, or UC-24RO: Press the Refrigerator WARMER as well as COLDER tricks for fifteen (15) seconds.
Error Code Table
| CODE | INDICATION |
| 05 | Refrig. cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 06 | Refrig. evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 07 | Freezer cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 08 | Freezer evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 20 | Defrost under-heat with no voltage feedback through Gray/White wire at defrost start |
| 21 | Defrost overheat |
| 22 | No voltage feedback through Gray/White wire at defrost start |
| 23 | Defrost overheat with no voltage feedback through Gray/White wire at defrost start |
| 24 | Defrost under-heat |
| 30 | N/A |
| 40 | Excessive Freezer Compressor Run |
| 50 | Excessive Refrigerator Compressor Run |
| Error Code | CAUSE | SOLUTION |
| Error Code 15 | There is an issue or fault with the sealed system. | The “sealed system” of your refrigerator is what allows it to get cold. It consists of the compressor and condenser. Troubleshooting a sealed system fault requires the assistance of an experienced technician. However, rebooting the refrigerator may solve the error. To reboot the refrigerator, turn off power to the outlet at the circuit breaker and wait a full minute. Turn power back on and allow the refrigerator to resume operation. If the error continues, contact a Sub-Zero refrigerator repair technician. |
Error Code 15
A. If “EE” for refrigerator area was revealed along with “SERVICE” blinking, check the following:.
Thermistor electric links as well as continuity from thermistor to J5 on control board. Reconnect/ dealing with.
Resistance of thermistor– 30,000 to 33,000 ohms at 32 ° F( 0 ° C). Replace if malfunctioning. B. If “EE” for fridge area was ABSENT, concern is repeating thermistor blunder:.
Door not closing properly. Suitable door closing problem.
Check light button, electrical wiring & electrical web links. Taking care of electric circuitry/ web links or alter switch.
Check out thermistor electrical links and connection at J5 on control panel. Reconnect/ repair service.
Analyze resistance of thermistor– 30,000 to 33,000 ohms at 32 ° F (0 ° C). Change if defective.
C. If “EC 05” in addition to “OPTION” were blinking prior to initiating evaluation mode, gadget likewise experienced severe compressor run trouble that might or might not be associated with the “05” Error Code. See Mistake Code 50 Test/Actions.
