Sub-Zero is the embodiment of design as well as efficiency refrigeration. It isn’t simply a device, your Sub-Zero is an essential element of your exceptional kitchen location. It makes great feeling that you wouldn’t intend to trust your refrigerator to just any type of kind of home device repair firm. You want a team of Sub-Zero refrigerator fixing experts that can secure your financial investment while supplying the costs solution you are worthy of.
It Is Fixed Residence Device Repairing is business you must count on with every one of your Sub-Zero repair demands. Our professionals focus on Sub-Zero remedy so you can rely upon that we have the abilities to finish the work right.
HOW TO USAGE THE ERROR CODE TROUBLESHOOTING GUIDE
Error Codes recommend issues subscribed by particular elements. If mistake codes are subscribed, they will definitely turn up before temperature readings while in Diagnostic Setup.
BEAR IN MIND: If Error Codes appear with a blinking “REMEDY” annunciator prior to starting Diagnostic Mode, the system experienced excessive compressor run condition that could or could not be associated with the Mistake Codes presented
To launch Diagnostic Setting, press as well as also hold either CHILLIER trick, afterwards push the POWER trick, then launch both keys. Presently, check to see if Mistake Codes are present, ensuring to toggle with all blunder and temperature level analyses by pressing either COLDER crucial or either WARMER trick. (See Mistake Code Table Below).
If Mistake Codes appear throughout Diagnostic Setting, abide by the Mistake Code Troubleshooting Overview on the sticking to web page. The left column of the troubleshooting overview details the mistake codes. The info in the ideal column clarifies what examinations to execute and/or what activity to require to take care of the blunder.
KEEP IN MIND: If blunder codes are observed in analysis mode, a non-flashing SOLUTION annunciator will certainly show up on the LCD when Diagnostic Setting finishes, suggesting error codes are still saved. Blunder Codes have to be gotten rid of from the electronic control memory by hand. To eliminate the non-flashing SOLUTION annunciator and additionally the mistake codes, the difficulty has to be remedied as well as the unit has to be ON, after that:.
On a version UC-24C: Press the Refrigerator Freezer WARMER and COLDER keys for fifteen (15) secs.
On a layout UC-24B, UC-24R, or UC-24RO: Press the Fridge WARMER and COLDER tricks for fifteen (15) seconds.
Error Code Table
| CODE | INDICATION |
| 05 | Refrig. cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 06 | Refrig. evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 07 | Freezer cabinet thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 08 | Freezer evaporator thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp’s |
| 20 | Defrost under-heat with no voltage feedback through Gray/White wire at defrost start |
| 21 | Defrost overheat |
| 22 | No voltage feedback through Gray/White wire at defrost start |
| 23 | Defrost overheat with no voltage feedback through Gray/White wire at defrost start |
| 24 | Defrost under-heat |
| 30 | N/A |
| 40 | Excessive Freezer Compressor Run |
| 50 | Excessive Refrigerator Compressor Run |
| Error Code | CAUSE | SOLUTION |
| Error Code 11 | The refrigerator is too warm and/or the upper cabinet has been open too long | You will receive this error if your refrigerator’s upper cabinet has been open too long or if the upper cabinet is too warm. To resolve the error, disconnect the power from the unit at the circuit breaker. Leave the power off for at least one minute. Turn the power back on and keep the refrigerator door closed until the unit has reached optimal temperature. |
Error Code 11
A. If “EE” for refrigerator area was shown along with “SOLUTION” flashing, check the following:.
Thermistor electrical links and connection from thermistor to J5 on control board. Reconnect/ taking care of.
Resistance of thermistor– 30,000 to 33,000 ohms at 32 ° F( 0 ° C). Change if malfunctioning. B. If “EE” for fridge location was ABSENT, concern is reoccuring thermistor blunder:.
Door not closing suitably. Appropriate door closing issue.
Examine light button, electrical wiring & electrical links. Taking care of electric wiring/ web links or alter switch.
Take a look at thermistor electric links as well as link at J5 on control board. Reconnect/ repair service.
Take a look at resistance of thermistor– 30,000 to 33,000 ohms at 32 ° F (0 ° C). Change if defective.
C. If “EC 05” as well as “SOLUTION” were blinking prior to initiating analysis mode, gadget likewise experienced extreme compressor run problem that might or might not be related to the “05” Mistake Code. See Blunder Code 50 Test/Actions.